9
English
Our products are designed to meet the highest standards of
quality, functionality and design. We hope you entirely enjoy
your new Braun shaver.
Warning
Your shaver is provided with a special cord set with an
integrated Safety Extra Low Voltage power supply. Do not
exchange or manipulate any part of it. Otherwise there is risk
of electric shock.
Description
1
Foil protection cap
2
Shaver foil
3
Cutter block
4
Styler
4a Wide shaper (28 mm)
4b Narrow shaper (14 mm)
5
Charging light
6
On/off switch
7
Trimming attachment
8
Beard length setting
9
Special cord set
Charging
The best environmental temperature for charging is between
15 °C and 35 °C.
•
Using the special cord set, connect the shaver to an
electrical outlet with the motor switched off.
•
When charging for the first time, leave the shaver to
charge continuously for 4 hours. The green charging
light (5) shows that the shaver is being charged. When
the battery is fully charged, the charging light intermit-
tently blinks on and off. This indicates that the battery
maintains its full capacity.
•
A full charge provides 30 minutes of cordless shaving
time depending on your beard growth.
•
Once the shaver is completely charged, discharge the
shaver through normal use. Then recharge to full ca-
pacity. Subsequent charges will take about 1 hour.
•
Maximum battery capacity will only be reached after
several charging/discharging cycles.
•
If the rechargeable batteries are discharged, you may
also shave by connecting the shaver to an electrical
outlet via the special cord set.
Shaving
First, remove the trimming attachment: Using your thumbs,
press against the side clips of the trimming attachment so
that they swing off in the direction of the arrows (a).
Activate the on/off switch (6). The floating foil frame
automatically adapts to your skin surface for a close,
smooth shave.
Cruzer_2865_MN Seite 9 Montag, 17. Mai 2004 3:03 15
