Braun CareStyle Compact IS 2043 BL, Руководство пользователя

Страница: 7 / 16

7
(i.e. embroidery), turn them inside out and, if
necessary, lay a cotton cloth between the iron and
the fabric. This way you avoid damage and get the
volume of fabric designs that are not to be ironed
flat.
•
In order to prevent new creases while ironing
with steam make sure that the garment shows no
residual moisture before going on ironing other
parts of it.
(C) Settings
iCare
The iCare mode is automatically chosen when the
appliance is plugged in. The iCare mode indicator
(11) is on.
This mode is suggested for garments like wool,
polyester and cotton/linen.
eco
The eco mode is suggested for most delicate
garments like synthetics, silk and blended fabrics
for which you need less steam. This mode allows
less power consumption.
To select the eco mode, press the mode button
(12). The eco mode indicator (10) turns on.
turbo
The turbo mode is suggested for garments that
need more powerful steam, like thick cotton/linen
and jeans.
To select the turbo mode, hold down the mode
button (12) until the eco mode indicator (10) and
the iCare mode indicator (11) turn on.
Double trigger (turbo mode only)
Use the double trigger function to remove stubborn
creases.
Press the steam button (2) twice quickly. There will
be a continuous steam emission for a few seconds.
Press the steam button once again during steam
emission to stop the function.
To repeat the steam boost wait about 12 seconds
before pressing again the steam button.
Vertical steam (iCare mode only)
The iron can also be used for steaming hanging
clothes for a quick refreshment. However, this
function does not replace ironing.
Ensure the iCare mode is selected and hold the iron
in a vertical position, tilted slightly forwards.
Press repeatedly the steam button (2) while moving
the iron from top to the bottom. Then place the iron
on the iron rest.
Steam is very hot: never iron or dampen garment
while wearing them.
3D soleplate
The unique round shape of the 3D soleplate
ensures best gliding results on difficult parts
(e. g. buttons, pockets etc.)
(D) Auto-off
This function is activated if after 10 minutes there
has been no steam emission.
•
When the appliance is in the auto-off mode the
temperature control LED (1) is flashing in a faster
interval.
•
To turn the iron on again press the reset button
(14), the mode button (12) or the steam button (2).
•
Before start ironing again wait until the
temperature control LED is permanently on.
(E) Lock system / storage
The appliance is equipped with a lock system for
convenient transportation and easy storage. It
is possible to lift and carry the appliance on the
handle of the locked iron.
NOTE: Before transportation make sure the iron is
properly locked and has cooled down completely. In
case you do not use the appliance for a longer time
(more than 1 month), empty the water tank before
storage.
•
Place the iron on its heel rest (3) into the iron rest
(4) on the base unit.
•
To lock the iron turn the locking knob (15) to .
•
To unlock the iron turn the locking knob to .
The iron will be released.
Unplug and let the appliance cool down (the
soleplate is hot) before winding the cords for
storage.
(F) Anti-limescale fi lter cartridge
replacement
To maintain optimum performance of your
appliance it is important to exchange regularly the
anti-limescale filter cartridge or use demineralised
water.
When the anti-limescale filter cartridge requires
changing, the anti-limescale indicator (13) turns on.
a. Unplug the appliance.
b. Remove the old anti-limescale filter cartridge (7)
by lifting it out of the water tank (8) and dispose
it.
c. Follow the instructions given on the foil and
insert the new anti-limescale filter cartridge
into position until it locks into place.
5712812211_IS_2043_2044_CN.indd 7 5712812211_IS_2043_2044_CN.indd 7 21.02.19 10:29 21.02.19 10:29