9
How to use the bodycruZer
Make sure that you always keep your skin stretched
when shaving or trimming.
The bodycruZer is not intended for removing facial
hair or scalp hair.
Trimming
Trimming on the skin/contour trimming
For trimming precise lines and contours, just use
the trimmer (2) (picture a).
Press the on/off switch (6) to turn on the
bodycruZer.
Stretching your skin, carefully move the trimmer
against the direction of hair growth.
For this function, you can use Gillette shaving
foam or gel.
Using the trimming combs 1a – 1c
For best results use the trimming combs on dry
hair only. Do not use shaving foam or gel for this
application. Whenever hairs build up in front of
the comb, remove them.
Trimming on the skin in sensitive areas (e.g.
genital area) with the «sensitive» attachment 1a
For trimming in sensitive areas and improved
skin care, you should use the «sensitive»
attachment (1a) (picture b). Snap it onto the
trimmer (2) as shown until it clicks into place.
Press the on/off switch (6) to turn on. Gently
move the bodycruZer against the direction of
hair growth with the comb tips pointing forward.
In sensitive areas take special care that the skin
is always stretched to avoid injuries.
Trimming the hair length with trimming combs
«medium» and «long»
The trimming combs (1b/1c) allow you to cut the
hair to 2 different lengths («medium» = 3 mm or
«long» = 8 mm).
Start with the «long» trimming comb (1c) to
acquire practice. Gently move the bodycruZer
against the direction of hair growth with the
comb tips pointing forward (picture c).
Combishave («trim&shave»):
Trimming and shaving in one stroke for a close
shave of long haired sections with the trimmer (2)
and shaving system (3).
•
•
98832641_BodyCruzer_II_NA.indd 9
98832641_BodyCruzer_II_NA.indd 9
14.10.2008 13:59:37 Uhr
14.10.2008 13:59:37 Uhr
