Braun BLACK1320, Руководство пользователя, Страница: 45 / 121

9.Installation and positioning
To verify that the camera effectively monitors the selected area, pull the switch to
“SETUP” and fix the camera.
●
9.1 Calibrate the camera installing position
Within the monitoring area you want, try different distances and angles to move
repeatedly around the camera, the LED indicator flash to prove within the monitoring
range. The LED light does not flash to prove outside the monitoring range.
The results verified by the test will help you find the best place to install your camera.
The height of the camera placed from the ground should be depending on the size of
the animal .Generally, minimum 1-2 meters are best.
Make sure the camera is working without any interference. Direct sunlight or installa-
tion near branches should be avoided.
●
●
●
●
Pull the camera switch to the “ON” state. After 5 seconds, the screen will turn off and
enter the monitoring mode. Once an animal enters the sensor detection area, the
camera will be activated and the camera will automatically shoot. If the animal leaves
the sensor detection area, the camera will turn off and return to standby mode.
●
9.2 ON Mode
When the camera works at night, the infrared light will turn on automatically to
illuminate about 3-22 meters , it can cause overexposure if the animal is too close to
the camera.
●
9.3 Dark Mode
18