Page 7
For technical questions, please call 1-888-866-5797.
Item 64738
Record Serial Number Here:
Note:
If light has no serial number, record month
and year of purchase instead.
Note:
Replacement parts are not available for this item.
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this
manual, including all text under subheadings therein before setup or use of this product.
1. Plug the Work Light into a grounded
120 VAC electrical outlet.
2. Carry Work Light by Handle and
place where desired.
3. The Work Light may be tilted if desired.
To Tilt: Loosen both side Knobs, tilt, tighten Knobs.
4. When ready to use, press Power
Button to turn the light on.
5. When done, press Power Button to turn the light off.
6. To prevent accidents, turn off Work Light and
disconnect power cord after use. Clean, then
store light indoors out of children’s reach.
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Unplug the tool from its electrical outlet before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM LIGHT FAILURE:
Do not use damaged equipment. If damage is noted, have the problem corrected before further use.
1.
BEFORE EACH USE,
inspect the general
condition of the light. Check for:
• loose hardware,
• misalignment or binding of moving parts
• damaged cord/electrical wiring,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2.
AFTER USE,
wipe external surfaces of
the Work Light with a clean cloth.
WARNING! If the power cord of this
light is damaged, it must be replaced only
by a qualified service technician.
