background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 56354 

        

Specifications

Charging Base Input Rating

5VDC / 1A

Battery

3.7V Li-Ion 2600mAh

Charge Time*

4 hours

Run Time

Up to 3 hours (Eco mode)

CRI Rating

95+

Light Output

455 Lumens (high mode)

Beam Distance

Up to 111 Feet (high mode)

Color Temperature

4100K

Bulb Type

LED COB

Operating Temperature

14° F to 104° F

*Note: Charge time will vary depending on the amp rating of the USB port the cord is attached to.

IMPORTANT SAFETY INFORMATION

To prevent serious injury, FIRE, and EXPLOSION:

1.  Do not open the device, except when 

removing battery for disposal/recycling.

2.  To prevent permanent eye injury and 

blindness:  Do not direct light at eyes.

3.  Do not operate in direct sunlight or 

extreme temperature conditions.

4.  Keep away from children!  This is not a toy.

5.  Inspect before every use; do not use or 

charge if damaged or parts loose.

6. 

Have your tool serviced by a qualified 
repair person using only identical 
replacement parts. 

 This will ensure that 

the safety of the tool is maintained.

7.  Do not set light down on lens while on.

8.  Only use included charging adaptor.  Other 

adaptors may damage tool or cause fire.

9.  People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields in 
close proximity to heart pacemaker could cause 
pacemaker interference or pacemaker failure.

10.  Contains Li-Ion battery.  Battery must be 

recycled or disposed of properly.  Do not open, 
crush, heat above 140° F or incinerate.

Lithium Battery Safety Warnings

LITHIUM BATTERIES STORE 
A LARGE AMOUNT OF ENERGY AND  
WILL VENT FIRE OR EXPLODE IF MISTREATED:

1. 

Keep Battery Pack dry.

2. 

DO NOT DO ANY OF THE FOLLOWING 
TO THE BATTERY PACK:

a. 

Open,

b. 

Drop,

c. 

Short-circuit,

d. 

Puncture,

e. 

Incinerate, or

f. 

Expose to temperatures greater than 265°F.

3.  Charge Battery Pack only according 

to its Charger’s instructions.

4.  Inspect Battery Pack before every use; 

do not use or charge if damaged.

Содержание 56354









Отзывы: