9
The regular use of massage sponges
(e.g. after showering) or exfoliation
peelings helps to prevent in-growing hair
as the gentle scrubbing action removes
the upper skin layer allowing fine hair
to get through to the skin surface.
Description
(see page 4)
Massaging rollers clip
Epilation head
Release buttons
Switch
Socket for cord connector
Cord connector
Special cord set
How to epilate
• Your skin must be dry and free from
grease or cream.
• Before starting off, thoroughly clean the
epilation head
.
• Attach the epilation head and make
sure that the massaging rollers clip
is
in place.
• Plug the cord connector
into the
socket
and plug the special cord set
into an electrical outlet.
1 To turn on the appliance, slide switch
to setting «2»
(«2» = normal speed,
«1» = reduced speed).
2 Rub your skin to lift short hairs. For
optimum performance hold the ap-
pliance at a right angle (90°) against
your skin. Guide it in a slow, continuous
movement without pressure against the
hair growth, in the direction of the
switch. The SoftLift
®
tips will make sure
that even flat-lying hair is lifted and
removed thoroughly at the root.
As hair can grow in different directions,
it may also be helpful to guide the
appliance in different directions to
achieve optimum results.
The massaging rollers
should always
be kept in contact with the skin,
allowing the pulsating movements to
stimulate and relax the skin for a gentler
epilation.
3
Leg epilation
Epilate your legs from the lower leg in
an upward direction. When epilating
behind the knee, keep the leg stretched
out straight.
4
Underarm and bikini line epilation
Use tests monitored by dermatolo-
gists have revealed that you can also
epilate the underarm and the bikini line.
Please be aware that these areas are
particularly sensitive to pain. With
repeated usage the pain sensation will
diminish.
Before epilating, thoroughly clean the
area to remove residue (such as
deodorants or creams). Carefully dab
the area dry with a towel. When
epilating the underarm, keep your arm
raised up and guide the appliance in
different directions.
Cleaning the epilation head
5 After epilating, unplug the appliance
and clean the epilation head:
First remove attachment
and clean
it with the brush.
6 Thoroughly clean the tweezer element
with the cleaning brush and also with
alcohol. While cleaning, you can turn
the tweezer element manually. To
remove the epilation head, press the
release buttons
on the left and right
and pull it off.
1
2
3
4
5
6
7
2
1
6
5
7
4
1
1
3
99683012_SE3170_S6-24 Seite 9 Mittwoch, 27. Oktober 2010 3:56 15
