Braun 2008 & Up Chrysler Foldout Entervan Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 62

Braun 2008 & Up Chrysler Foldout Entervan Скачать руководство пользователя страница 40

Page 38

SEAT REMOVAL AND INSTALLATION

When installing seats,

be cer-

tain seat wiring harnesses are
reconnected.

Failure to do so

may result in power seat functions
being disabled and/or the air bag
light illuminating.

Adjustable Pedals:

The adjust-

able brake and accelerator pedal
feature is disabled when the driver
seat is removed.

Screw-on Connectors

Front seat wiring harnesses are
equipped with a screw-on connec-
tor (plug). Operate connectors as
detailed here and on page 39.

A label is posted on the seat wiring
harness plug which identi

fi

es the

top of the connector (“TOP” decal
28891). Position the plug with the
“TOP” label facing up when con-

CAUTION

Disconnect seat
wiring harness
before removing
seat. Failure to do
so may result in
property damage.

WARNING

Connect front seat
wiring harness plug
to socket provided
at top of seat base
before removing front
seat. Failure to do so
may result in serious
bodily injury and/or
property damage.

necting the plug to either recep-
tacle socket. Use this feature as
an alignment guide.

Note:

Alignment grooves (slots)

are provided in receptacle sock-
ets. Receptacle sockets have a
single wider alignment groove that
is positioned at 12 o’clock (shown
on page 39). Seat wiring harness
plugs are equipped with mating
alignment guides (ears).

«
...
38
39
40
41
42
...
»

Содержание 2008 & Up Chrysler Foldout Entervan































































Отзывы:

Нет отзывов