Braun 140s-1, Руководство пользователя

Страница: 18 / 24

18
shaver head under hot
running water until all
residues have been
removed.
•
You may use liquid soap
without abrasive sub-
stances. Rinse off all
foam and let the shaver
run for a few more
seconds.
•
Next, (model 150s, 140s:
switch off the shaver)
remove the shaver foil (2)
and cutter block (3).
Then leave the disassem-
bled shaving parts to dry.
•
If you regularly clean the
shaver under water, then
once a week apply a
drop of light machine oil
onto the long hair trim-
mer (4) and shaver foil.
Alternatively, you may
clean the shaver with a
brush (B):
•
Switch off the shaver.
Remove the shaver foil
and tap it out on a flat
surface.
•
Using the brush, clean
the cutter block and the
inner area of the shaver
head. However, do not
clean the shaver foil with
the brush as this will
damage the foil.
Keeping your shaver
in top shape
Replacing the shaver
foil and cutter block
To maintain 100% shaving
performance, replace the
shaver foil (2) and cutter
block (3) at least every
18 months or when worn.
Change both parts at the
same time for a closer
shave with less skin
irritation. (Shaver foil and
cutter block: 11B)
91874780_UI_150s140s130s_CN-KR.indd 18 91874780_UI_150s140s130s_CN-KR.indd 18 21.12.20 08:55 21.12.20 08:55