
Page 9
$GMXVWWKH)ORRU/HYHOVZLWFKÀUVW
(de-
tailed in previous section). If the Floor
Level Requirements (at right) are not
met - adjust the Bridge Plate cam as
detailed in the following procedures.
Notice: Adjustment of the bridge plate
cam affects the timing of bridge plate
deployment and torque tube/vehicle
clearance.
1. Raise the lift platform fully to previ-
RXVO\VHWÁRRUOHYHOSRVLWLRQFP
- 6.4 cm (1 1/2
"
DERYHÁRRU
level). Switch off lift main power.
2. Measure the height between the
WRSRIWKHUROOLQJKRUL]RQWDOFDUULDJH
arm and the bottom of the platform.
See Photo D.
3. Lower platform to a comfortable
working level (stow level or slightly
higher).
C
Floor Level and Bridge Plate Adjustments
B
CORRECT
INCORRECT
3.8 cm -6.4 cm
(1 1/2
" -
2 1/2"
)
End of bridge plate
FRQWDFWLQJÁRRU
Gap
Less than 3.8cm
(1 1/2
")
Bridge Plate Cam Adjustment
Floor Level Requirements: When the lift is po-
VLWLRQHGDWÁRRUOHYHOUDLVHGIXOO\WKHERWWRP
RIWKHSODWIRUPPXVWEHDERYHÁRRUOHYHODQG
the bridge plate must rest solidly on vehicle
ÁRRU6HH3KRWRV%DQG&
Continued