![Braun Corporation Under-Vehicle Lift 04 Series Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/braun-corporation/under-vehicle-lift-04-series/under-vehicle-lift-04-series_service-manual_2805221013.webp)
Page 11
CAUTION
Do not adjust
the bridge plate
linkage rod
unless
H[WUD
usable platform
length is need-
ed. See Photo I.
Linkage rod adjustment affects angle
of bridge plate (vertical position).
Improper bridge
plate linkage rod
adjustment may
result in lift damage.
If the angle of the bridge plate (when in the
vertical position) restricts the usable platform
OHQJWKIRUWKHZKHHOFKDLUSDVVHQJHUDGMXVW
-
ment of the linkage rod will change the angle.
Adjust the bridge plate as detailed in the previ-
RXVSURFHGXUHV7KHQDGMXVWWKHOLQNDJHURG
as detailed (only if necessary). If the linkage
URGLVRYHUDGMXVWHGWRRORQJRUWRRVKRUWLW
ZLOOH[FHHGWKHWUDYHORIWKHVOLGHUEORFNUHVXOW
-
LQJLQGDPDJHWRWKHFDPIROORZHUEHDULQJWKH
cam and/or other components.
I
Floor Level and Bridge Plate Adjustments
Usable Platform Length
Linkage Rod Adjustment
Bridge Plate
Linkage Rod
J
1. Position the lift platform below stow
level.
2. Loosen the jam nuts at each end of
the linkage rod. Adjust rod length as
QHHGHG0LQLPL]HDGMXVWPHQW
3. Carefully check the bridge plate angle
and operation using the
hand pump.
Ensure the linkage rod has not been
over adjusted resulting in pressure on
components (damage will result).
4. Tighten the linkage rod jam nuts.
Содержание Under-Vehicle Lift 04 Series
Страница 46: ...Page 44...