2
3
QUICK START
ASSEMBLING THE WORK STATION
USING THE WORK STATION
Add your nail polish and accessories
around the salon base.
Pull out the pedi-drawer and add the included doll
feet to your Bratz® doll (not included). Sit her in
the salon chair, and place her feet in the drawer
for a soothing pretend soak to start her pedi.
While your doll (not included) is relaxing, pamper yourself by filing your nails and adding a coat
of nail polish. You can even add stickers for more fun! Just peel and stick after the polish dries.
IMPORTANT:
Wait until nail polish dries before performing any activities with your hands. Do not use
nail polish on pets, furniture, textiles, etc.
After you’ve added color to your nails on one hand, carefully slip your hand into the opening at the
bottom of the salon base.
Press and hold
the button located inside the opening to start the “nail dryer”
blower. Relax until the nails are dry. Repeat this process for your other hand as well!
PEDI
DRAWER
SALON BASE FRONT
DRYER BUTTON INSIDE
Before beginning, cover the play area to prevent possible damage.
COLOR CHANGE
1. Prepare a cup of water and ice cubes.
2. Dip the pet’s feet into the ice water for a few seconds.
3. Watch color magically appear on the pet’s paws!
4. Place a warm hand over the color changed paws to make them return to their original color.
Note: Only the pet’s feet will change color.
PET COLOR CHANGE
IMPORTANT COLOR CHANGE INFORMATION:
•
Allow the pet to air-dry only. DO NOT place in dryer or subject to excessive heat.
• DO NOT dunk the pet’s entire body completely under water. Only dip the pet’s feet.
• DO NOT place the pet’s feet in extremely hot water.
• DO NOT store in direct sunlight for extended periods of time.
•
Exposure to sunlight may deactivate pet’s color change feature.
Place the nail salon chair in the front center of the
salon base. Connect the disco ball to the pole. Then,
insert the pole into the opening on the salon base.
Insert the back wall of the salon into the slot
behind the salon chair.
