brastel FLIP ATA, Руководство пользователя, Страница: 4 / 12

user guide
4
ATA
Case A: ADSL modem with built-in router
Before and after setting up the ATA (splitter is optional).
AFTER
PC
Modem
Phone Set
Splitter
Phone Line
Phone cable
LAN cable
PC
Modem
Splitter
Phone Line
Phone cable
LAN cable
ATA
BEFORE
SETTING UP THE ATA
The setup will depend on the other devices already installed for the internet connection, as well as where
the provider information (PPPoE) is registered.
The PPPoE (user authentication for the internet connection) must be registered on the modem (with built-
in router) or on a router.
After setting up the ATA, wait a few minutes for system to stabilize.
If you do not have a modem (with built-in router) or a router, please set the PPPoE on the ATA according
to the Addendum I, page 7 (you will need the user name and password given by the internet provider).
NOTE: The ATA is only a phone adapter with features to allow the usage of the FLIP service on your network and cannot be used
as a router.
Check in what case do you fit in and setup the ATA as showing in the images.
Case B: ADSL modem and router separately
Before and after setting up the ATA (splitter is optional).
PC
Router
Modem
Splitter
Phone Line
Phone cable
LAN cable
Phone cable
LAN cable
PC
Router
Modem
Splitter
Phone Line
BEFORE AFTER
ATA
Phone Set
Phone Set
Phone Set