www.brasscraft.com
MACHINE MAINTENANCE
To reduce the risk of electric shock, fire, serious injury
or death, the motor switch should be OFF and machine
unplugged prior to performing any maintenance,
adjusting, or when cleaning this product.
Cables
• The metal cable should be thoroughly cleaned with
water and lubricated to prolong cable life and prevent
unpleasant odors and the damaging effects of
sediment and drain cleaning compounds. Cleaning and
lubricating should occur prior to storing the machine.
• Regularly inspect cables for damage. Replace cables
that are worn or kinked.
Lubrication
The cable will need to be lubricated after each use.
Storage
Store machine in a dry, safe, secured place, out of the
reach of children and people unfamiliar with this machine.
General maintenance and other tasks detailed in this man-
ual, such as the replacement of the cable or a damaged
belt guard can be done by a qualified owner.
Other ser-
vicing repairs, such as the replacement of a defective
motor switch, must only be done by Brasscraft. Please
contact BrassCraft Customer Service at 877-272-7755.
When servicing, use only genuine BrassCraft parts or
contact customer service. Not using proper parts may
result in electric shock/serious injury or death.
Installing Replacement Cable
1. Ensure the motor switch is OFF and machine
unplugged.
2. Loosen the chuck and remove existing cable from the
machine.
3. Disconnect secured cable end from inside drum unit.
4. Carefully remove the new cable from the packaging.
The tension is likely built up and has potential to strike
the user.
5. Uncoil the new cable completely.
6. Carefully insert the cable into the drum and
reconnect the cable to the inside drum unit for a
counterclockwise insertion.
7. Once cable is secured in drum, continue to insert the
remaining cable counterclockwise until you reach the
slotted end. This part should remain on the outside of
the drum.
8. Finally, tighten the chuck.
REPAIRING YOUR DRUM
MACHINE
