Heater Packaging
Heaters are made up of three pieces shipped in two boxes; the burner control box in the first box and the
emitter assembly and reflectors in the second box (see Figure 3.2).
WARNING
!
Improper suspension of the radiant tube heater may result in collapse and being crushed.
Always suspend from a permanent part of the building structure that can evenly support
the total force and weight of the heater.
Failure to maintain minimum clearance to combustibles may result in fire and/or explosion,
property damage, serious injury or death. Always maintain minimum clearances and post
clearance safety limit signs or the clearance safety tag where needed.
Chart 3.3
•
Heater Mounting Requirements and Weights
Shipping Dimensions:
B
= Burner Control Box (15#) & (31.5”L x 17.5”W x 15.5”H)
T
= Emitter Assembly and Reflector Box (88#) & (91”L x 31”W x 14”H)
NOTE:
See Kit Contents on page 44.
Figure 3.2
•
Heater Packaging
•
2 Pieces
Burner Control Box
Emitter Assembly and Reflector Box
QTD
Series
12
Model
Overall Unit Length
Suspension Points
Shipping Weight
Chain Set Qty.
QTD-60 [N,P]
107”
3 or 4
103 lbs.
3
QTD-80 [N,P]
107”
3 or 4
103 lbs.
3
3.0
Installation
•
Heater Packaging
