17
●
Replacing the catalytic panels (depending on model)
Minor maintenance by the user
For all cleaning work in the oven cavity, the oven must be
switched off.
Sidewalls with slotted runners
Turn the screw a quarter of a turn in order to
remove the slotted catalytic liners (
Fig.1
).
Move it towards the front in order to unlock
the two tabs inserted into the oven chamber
(
Fig.2
).
Fig. 1
Fig. 2
Sidewalls with wire runners
Unhook the wire runner (
2 Fig.4
) by lifting it
(
diagram
A Fig.3
). Pull the whole of the
runner assembly towards you, and lift it in
order to unhook the rear attachment point
(
diagram
B Fig.3
). Remove it from the two
holes (
3 Fig.4
) of the catalytic liner and from
the oven chamber. Next, remove the catalytic
liner (
1 Fig.4
). Fit the new parts (liners
and/or runners) by carrying out the above
operations in reverse order.
B
A
1
3
4
2
5
Before carrying out any dismantling work, allow the appliance to cool
and check that the cooking selector knob is in the "Off" position.
Replacement of the base liner
Completely unscrew the screw
(5 Fig.4)
located at
the top of the base liner
(4 Fig.4)
. Tilt the liner
towards the front in order to remove it from the oven
chamber. Fit the new liner by carrying out the above
operations in reverse order.
Fig. 4
Fig. 3
99626702_GB_A.qxd 05/03/03 13:36 Page 17
