Brandt FRI2102E, Инструкция по эксплуатации

Страница: 28 / 70

28
4) LOOKING AFTER AND CLEANING YOUR MACHINE
a) Dismantling the Deep Fryer before Cleaning it
 Remove the fryer lid and basket.

Carefully remove the control unit and the element in the body. To do this hold the control
unit with one hand whilst holding the body firmly with the other. Just lift the control unit
upwards until it detaches from the body.
 Remove the frying pot. Grip the edge of the bowl with two hands and remove it from the
body.
b) Cleaning the Deep Fryer
Always unplug your fryer and leave the oil and your fryer to empty completely before
cleaning it.
Never soak the control unit, the power supply lead or the plug in water or any other
liquid.
Never use abrasive cleaning products.
None of the fryer parts are dishwasher-proof. Always wash them by hand.
Cleaning the removable tank, frying basket and lid
Remove all the food residues from the tank and basket using kitchen towel. Wash the parts by
hand in hot soapy water. Rub using a sponge. Dry the basket completely before putting it
away.
Cleaning the control unit, the other parts and the body
Wipe the surplus oil off the element with kitchen towel (take care not to damage the electric
wires connected to the heating element). Wipe the control unit and the body with a clean cloth,
either very slightly damp or dry.
c) Reassembling after Cleaning
 Place the machine body on a stable, safe, dry, horizontal surface.
 Hold the edge of the frying tank on both sides to lower it into the fryer.
 Reconnect the control unit to the body. The control unit has two rails into which the
corresponding parts should be inserted in the body of the fryer.