Brandt BWT6310E, Инструкция по эксплуатации

Страница: 12 / 84

12
EN
2 - USE
1 -
3 - PROGRAMMING
R
ECOMMENDATIONS
:
— Before inserting the linen, sort it by colour, how
dirty it is and the type of textile. Empty all pockets,
close zips, removes hooks from curtains, place
Small items of underwear in a mesh bag.
— Remove any loose buttons, pins and clips.
— Knot belts, and ties for aprons, etc.
2.1 - L
OADING YOUR WASHING (Diagram 2.1)
Operate the handle of the lid and open the drum
by pushing the button
.
Once the linen has been put in, ensure that
the drum has been closed properly. Ensure
that the edge of the button is visible.
A
3.1 - T
HE CONTROL PANEL
3.2 - P
ROGRAMMING A WASH CYCLE
A B
C D
F
A
B
Programme selector
Spin dry speed selector
C E
D
F
Delayed start setting
Display
Options
Start/Pause
E
2.2 - W
ASHING PRODUCTS AND ADDITIVES
(Diagram 2.2)
The product drawer has 4 compartments :
pre-wash (powder), wash (powder or liquid),
softener, bleach.
cl cl
— Use detergents that are certified for domestic
washing machines.
-- Do not use liquid detergents with the pre-wash
cycle and/or delayed start.
— Concentrated bleach must be diluted.
— Do not exceed the MAX level.
then press the «Start/Pause» button .
F
S
TARTING THE APPLIANCE
— Select your programme and temperature (see pro-
gramme chart) by turning the Programme
selector
. The estimated duration of the program-
A
me is displayed (Diagram 3.2.1). Once the cycle
has started and after a few minutes, the duration of
the programme will be updated according to the
quantity and type of linen being washed.
— Select your spin dry speed to suit the textile by
turning the selector
(automatically limited for
certain programmes).
— Select the options if desired using the
buttons
D
B
E
D
ELAYED START OF A PROGRAMME
— Select your programme using the programme
selector
.
A
— Press the «Delayed start» button to delay the
start of your programme, in steps of one hour until
the required delay is obtained (maximum 19h00).
— Confirm by pressing the «Start/Pause» button
.
The display shows the time remaining
before the start of the programme, four segments
successively light up in rotation
(Diagram 3.2.2 to
3.2.5)
. The last hour is counted down in minutes.
Once the delayed start phase is over, the pro-
gramme will actually start. The display shows the
time left and this becomes increasingly accurate as
the cycle progresses.
C
F
D