Brandt BDJ424DB, Инструкция по эксплуатации

Страница: 11 / 74

Adjusting t he rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
Open the door and switch on the appliance.
Within 60 seconds after step 1, press the Program button more than 5 seconds,
and then press the Delay button to enter the set model, the rinse aid indication
Press the Program button to select the proper set according to your using habits,
the sets will change in the following sequence: d3->d4->d5->d1->d2->d3.
The higher the number, the more rinse aid the dishwasher uses.
Without operation in 5 seconds or press the Power button to complete the setup
and exit the setup mode.
Close the cap after all.
Remove the rinse reservoir cap by
lifting up the handle .
Pour the rinse aid into the dispenser,
being careful not to overfill.
blinks as 1Hz frequency.
9