EN
5
2. While “0:00” is flashing, set the alarm time by repeatedly pressing
HOUR /
MIN.
Press and hold
HOUR / MIN
respectively for fast advance.
3. Repeatedly press
AL1 / AL2
to select the desired alarm mode (buzzer or
radio).
To check alarm time,
press and hold
AL1 / AL2
for 2 seconds, the alarm
time will flash briefly then return to clock time.
To turn off the alarm,
press
POWER
and the alarm will come on again at the
set time on the following days.
To cancel the alarm,
in standby mode, press
AL1 / AL2
until the alarm
indicator light goes out on the display.
Snooze function
This function can be used to stop the alarm temporarily for about 9 minutes
once the alarm is activated. When the snooze button is pressed, the alarm
sounds will stop and sound again after about 9 minutes.
The alarm indicator light will flash.
SLEEP TIMER
The sleep function is designed to automatically turn off the
Radio.
1.
In Radio mode, repeatedly press
SLEEP
to select the
desired sleep time from 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes.
2.
The radio will be turned off after the set sleep time has elapsed.
To check remaining sleep time
, press
SLEEP
.
To cancel sleep timer
, press
SLEEP
until “OFF” is shown.
To turn off the radio
before the sleep time has elapsed, press
POWER
.
Downloaded from www.vandenborre.be
