DUAL ALARMS OPERATION
Before setting the alarm time, make sure the Clock has been set.
Setting Alarm 1 or Alarm 2
1. In clock time state, press
AL. 1 / AL. 2
once and the display will
show the alarm time.
2. Press and hold
AL. 1 / AL. 2
until the hour digits flash on the
display.
3. While the hour digits are flashing, set hours by repeatedly
pressing or pressing & holding / .
4. Press
AL. 1 / AL. 2
to confirm.
• The minute digits will flash.
5. Whilst the minute digits are flashing, set minutes by repeatedly
pressing or pressing & holding / .
6. Press
AL. 1 / AL. 2
to confirm.
• The display will show “1-5”.
7. Whilst the weekday is flashing, set the alarm to sound on the
desired day(s) by repeatedly pressing or pressing & holding /
.
1-5: all five weekdays
1-7: weekdays & weekends
6-7: weekends
1-1: one day of the week
• If 1-1 is selected, set the specific day by repeatedly pressing
/ .
8. Press
AL. 1 / AL. 2
to confirm.
• “bu” will flash on the display.
9. Press
AL. 1 / AL. 2
to confirm and the alarm will be set to wake
to buzzer.
• If you want to set the alarm to wake to radio, while “bu” is
flashing on the display, press / to show the radio
frequency. Press
AL. 1 / AL. 2
to confirm. The volume level
will flash on the display.
• While the volume level is flashing, select the desired volume
level by repeatedly pressing / . Press
AL. 1 / AL. 2
to
confirm.
10. The alarm will sound every day at the preset time for 30
minutes. To switch off the alarm press .
EN-6
Downloaded from www.vandenborre.be
