EN
-
3
DISPLAY
Indicator light
No battery backup
SNOOZE
Turn off the alarm temporarily
ALARM1
Alarm 1 activated
ON, OFF
Power on or standby
ALARM 2
Alarm 2 activated
FM, AM
Radio frequency
SLEEP
Sleep timer
KHz, MHz
Radio frequency units
BATTERY BACKUP
The clock and alarm settings can be protected against AC power failure with the batteries for a short
period of time. If no backup batteries are installed or the power failure is prolonged, you will need to set
the clock again.
STANDBY STATE
Place the unit on a flat stable surface and plug the power adapter into the mains socket.
The “OFF” indicator light will illuminate, indicating the unit is in standby state. “0:00” will flash on
the display.
If no batteries are installed in the unit, the battery icon
will flash on the display.
SETTING THE CLOCK
1.
In standby state, press and hold
TIME
until only the hour digits flashes.
2.
Repeatedly press
TUN/+
or
TUN/-
to set the hours.
3.
Press
TIME
to confirm. The minute digits will flash.
4.
Repeatedly press
TUN/+
or
TUN/-
to set the minutes.
5.
Press
TIME
to confirm.
The hour and minute digits will stop flashing.
POWER ON/RADIO MODE
Press
POWER/MODE
to switch the unit on and enters the raido mode.
The radio frequency will briefly appear on the display and then return to clock time.
The “ON” indicator light will illuminate.
Downloaded from www.vandenborre.be
