TROUBLESHOOTING
If you have any of the problems listed below please use this troubleshooting guide to try and solve them. A little time
spent in this way may save you to the inconvenience of returning your equipment.
PROBLEMS
POSSIBLE CAUSE
POSSIBLE SOLUTION
No sound/power
Volume not adjusted;
Power cord not securely connected;
Batteries dead / incorrectly inserted.
y
Adjust the
VOLUME
control.
y
Connect the AC power cord properly.
y
Insert (fresh) batteries correctly.
Display does not
function properly / No
reaction to operation of
any of the controls
Electrostatic discharge.
Switch off and unplug the unit. Reconnect after a
few seconds.
Poor cassette sound
quality
Dust and dirt on the heads, etc.
Use of incompatible cassette types
(METAL or CHROME).
y
Clean deck parts etc. ( see ‘MAINTENANCE’).
y
Only use NORMAL (IECI) for recording.
Recording does not
work.
Cassette tab(s) may be broken.
Apply a piece of adhesive tape over the missing
tab space.
No disc indication.
No CD inserted.
CD badly scratched or dirty.
Laser lens steamed up.
CD-R is blank or the disc is not
finalised.
y
Insert a CD, CD-R, MP3 or CD-RW.
y
Replace / clean CD (see ‘MAINTENANCE’).
y
Wait until lens has cleared.
y
Use a finalised CD-R.
CD/MP3 playback does
not work.
CD/MP3 badly scratched / dirty.
Laser lens steamed up.
y
Replace / clean CD (see ‘MAINTENANCE’).
y
Wait until lens has adjusted to room
temperature.
The CD skips tracks.
CD damaged or dirty.
Program is active.
y
Replace or clean CD.
y
Quit program mode.
We apologise for any inconvenience caused by minor inconsistencies in the instructions, which may occur as a result of
appliance improvement and development.
Kesa Electricals © UK: EC1N 6TE
1
7
-0
1
-201
3
EN
-
8
Downloaded from www.vandenborre.be
