22
English
5. Assembly
Take the fan out of the package and check the device as well as the scope of deliv
-
ery mentioned in the table above. Please contact the supplier directly if any part is
missing or has been damaged.
1.
To connect the base including the inner pipe (
11
) to the motor unit (
8
), first
screw the pedestal (
14,15
) to the outer pipe.
2.
Take the pedestal weight
(15)
, place the guard
(14)
on it, and connect the outer
pipe
(13)
to the pedestal.
3.
Fix the outer pipe (
13
) to the pedestal (
14,15
) from below using the fastening
screw (
16,17
).
4.
Connect the base unit to the motor unit (
8,9
).
5.
To do this, connect the inner pipe (
11
) to the guide of the fan control (
9
) and
mount the inner pipe (
11
) using the adjusting screw (
10
).
6.
Now place the rear protective cage (
6
) on the fan unit. Make sure that the
handle is facing up.
7.
Tighten the rear protective cage firmly using the locking nut (
5
).
8.
Then insert the rotor blade
(4)
onto the motor shaft (
7
) and fasten it using the
appropriate mounting screw
(3)
. Make sure that the individual components are
properly mounted on the motor shaft (
7
) to avoid vibrations!
9.
Mount the
protection cage ring (
2
) to the front protective cage (
1
) and connect
it to the rear protection cage (
6
). The protection cage lock (
19
) is located at the
bottom of the two cages.
10.
Fasten the lock (
19
) using the protection cage locking screw (
18
)
.
11
Inner pipe (
inserted into the outer pipe when delivered (13
))
12
Height adjustment nut
13
Outer pipe
14
Pedestal cover
15
Pedestal weight
16
Pedestal locking member
17
Pedestal - locking screw
18
Protective cage - locking screw
19
Protective cage - lock
Содержание 303368
Страница 1: ...Standing Fan Mod Nr 303368 User Manual EQUIPMENT ...
Страница 63: ...Notes ...
Страница 64: ...WD Plus GmbH Wohlenbergstraße 16 30179 Hannover Germany EQUIPMENT ...
