Brandson 301518/20150925FZ003, Руководство пользователя

Страница: 16 / 48

16
English
Mount the sensor unit on a wall using the recess on the rear side. Alternatively,
you can place the sensor unit also at a location that is protected from direct ex -
posure to sunlight and rain. Subsequently, place the main unit with the stand on
a flat surface.
If the weather station cannot produce a signal with the sensor unit within 7 min -
utes, place the main unit and sensor unit closer together. Press and hold the "CH"
button on the rear side of the main unit for approx. 5 seconds. Then the main unit
tries to reconnect to the sensor unit again.
7 Button functions
8 Setting the date and time
To set the time and date, keep the "TIME" button on the rear side of the main
unit pressed. You can make the desired settings using the "UP" and "DOWN"
buttons. Confirm your setting with the "TIME” button and continue with the next
setting item.
Button / Action Function
Press and hold the "Time"
button for 3 seconds
Time setting
Press the “ALM” button Switch between Alarm 1, Alarm 2 and Standard
mode
Press and hold the "ALM”
button for 3 seconds
Alarm settings
Press the “UP” button Turn alarm function on or off
Press the “DOWN” button Switch between °C and °F
Press the “SNZ” button Switch on backlight for 5 seconds
Press the “CH” button Switch between CH1, CH2 and CH3
Press and hold the "CH”
button for 3 seconds
Reset the current data of the selected channel