19
English
Measure the second point as described above. The device automatically calcu
-
lates the area and shows the result on the display. The measurement results of
the lengths of the first and second sides are displayed in the auxiliary display area.
Note: In the Pythagoras measurement mode, the right side has to be smaller than
the hypotenuse, otherwise the device shows an error message "D.E".
Notes for measurements
•
If the upper surface of the object to be measured is a liquid or a clear and
transparent substance, then the measurement may show an error.
•
If the object to be measured is highly reflective, then the laser may also be
reflected and errors could occur in the measurement.
•
If the object to be measured is very dark or hardly reflective, then the time
required for measurement may increase.
•
Sunlight adversely affects the range of the device!
10. Error display and troubleshooting
Error
Cause of error
Troubleshooting
B.L
Battery capacity is too low
Replace the batteries
T.L
The temperature is too low
Warm up the device a little. Always
note the approved working tempera-
ture range of the device
T.H
The temperature is too high
Cool down the device a little. Note the
approved working temperature range
of the device at all times
D.E
Data error during measure-
ment
Carry out the measurement again and
correctly
Содержание 20200108NB131
