INSTALLATION INSTRUCTIONS
FLTW-7629 Instructions 11-23-16.docx
Page 2 of 3
GS
1.
Remove the factory cargo lamp from the
vehicle by removing the (2) Phillips screws and
lifting from the bottom.
2.
Unplug factory connector from the back of the
light.
3.
Place the factory cargo lamp on top of the
cargo lamp bracket with camera, and reconnect
the factory cargo lamp connector.
4.
Insert the camera harness into the opening in
the roof.
5.
From the inside of the vehicle remove the rear
of the headliner to gain access to the camera
harness. (Each vehicle is different, be careful
not to bend the headliner too much to access
the harness).
6.
Route the cable forward to the A-pillar of the
vehicle.
7.
Remove the (2) covers on the handle to gain
access to the 10mm bolts.
8.
Remove the (2) 10mm bolts and route the
harness down the pillar toward the display. (Be
careful of any airbags in the pillar and avoid
routing the harness over the airbag).
