INSTALLATION INSTRUCTIONS
FLTW-7617 Instructions 7-18-16
Page 4 of 4
JM
21.
Connect supplied Chassis Harness to Tailgate Handle
Camera harness.
22.
Secure supplied Chassis Harness along the existing
Chassis Harness using Wire Ties (recommended)
every 200mm (approximately 8”).
Note:
Depending
on vehicle wheelbase there may be excess length in
the Chassis Harness. Loop, and secure with Wire
Ties (recommended) or Electrical Tape, any excess
harness length along the Body Frame away from
Mechanical areas.
23.
Test system functionality.
24.
Re-install all previously removed trim.
CAMERA PARKLINE OPTION
The camera offers Park lines or non-Park
lines options.
Park line options:
Default setting
displays
Park lines
. To remove the grid line display,
pull back plastic convolute from end of camera
harness and connect the two green wires.
Display options:
Do not use white wires.
Green and White wires on the Camera Harness.
