1
Clean installation
surface of windscreen
(windshield)
6
If powered on , follow
the installation guide to
start setup.
2
Remove tape off
bracket and install in
suitable place
horizontally
7
When setup gets
completed , Live-view
screen will appear .
3
After attaching mini
HUB , connect and
arrange the main body-
to-mini HUB cable .
* Installation Notice2.
! Turn off vehicle power completely before
①
connecting product to mini HUB
②
and connect optional devices( display & vibrator )
to mini HUB
③
at the finish , connect the vehicle cable
! If the product and optional devices are connected
when turned-on vehicle power is applied to mini HUB ,
it may cause internal product damages.
! It is recommended to change settings when vehicle
power is switched to IG status. If Camera Reset is
done in the unstable shaking condition , ADAS
functions may not perform well enough.
4
Connect power cable to
arranged vehicle wires
(refer to mini Hub Pin
Map)
5
Connect optional
devices firstly to mini
hub, afterwards ,
connect the vehicle
cable
[ Basic Installation Guide ]
This instruction shows how to install the main body and basic components .Please read carefully before
installation.
