INSTALLATION INSTRUCTIONS
Universal Trailer Rear Vision System With 7” Monitor
(Kit # 9002-7802)
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit:
Tools & Supplies Needed:
10m 4pin Connector Cable
20m 4pin Connector Cable
2 Connector mounting brackets
1 IR Camera
7” Monitor
2 Vehicle Mounted Connectors
1 4pin Coiled Cable
Electrical tape
Zip ties
1” Hole Saw
3/16” Drill Bit
Digital Volt Meter / BCM safe test light
Screwdriver
Socket set
Wrench
Safety Precautions:
●
Work in well ventilated area that is clear of obstructions.
●
Secure vehicle with tire chucks in both front and rear of tires.
●
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
●
Wear safety goggles and snug fitting clothes.
●
Use tools only for their intended purpose and which are in good repair.
●
Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, please visit
7802 Instructions 6/26/18
Page 1 of 6
KB
