About “WIRE CTR DELAY”
This function is used with wire control switch.
1. If "WIRE CTR DELAY" is set "OFF", this function is same as the touch button "CH" .
2.If "WIRE CTR DELAY'' is set as other parameters, you switch one video screen to another one by wire control switch,
once the delay time is up, the screen will be automatically back to the pre-switching video screen.
MENU SETTING
The settings menu can only be accessed by using the remote control as described below.
When the car is in reverse, short press “ ”, you can switch among “PICTURE”, “SYSTEM”,“SETTING” or enter out.
When you enter “PICTURE”, press “ ” to switch among the items.“ ” and “ ” are to change the figure
of each setting. “SYSTEM”, “SETTING” is the same as explains above.
PICTURE
BRIGHTNESS
50
50
50
CONTRAST
COLOR
Remote control
Menu setting guidance
In “full display screen” state, short press “ ” to enter into menu setting interface .“ ” and “ ” are to
change the figure of each setting.
2. Mirror without Split-screen Function
1. Mirror with Split-screen Function
Enter picture menu
Menu parameter decreases
Guide line up
Guide line left
Enter guide line adjustment
Guide line clockwise
Guide line anti-clockwise
Menu parameter increases
Guide line right
Guide line down
Shortcut key for channel switch
BRIGHTNESS
50
11
12
9
10
