INSTALLATION INSTRUCTIONS
9002-2738.docx
Page 1 of 4
2014-Current Jeep Cherokee and 2015-Current Chrysler 200
Backup Camera Interface
(Kit # 9002-2738)
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit:
Tools & Supplies Needed:
9002-2738 module
T-harness w/video RCA
USB to mini USB for updating
These instructions
Plastic panel removal tool
Phillips screwdriver
Wire cutters
Wire strippers
Electrical tape
Zip ties
Safety Precautions:
•
Work in well ventilated area that is clear of obstructions.
•
Secure vehicle with tire chucks in both front and rear of tires.
•
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
•
Wear safety goggles and snug fitting clothes.
•
Use tools only for their intended purpose and which are in good repair.
•
Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, please visit www.brandmotion.com
Install in a 2015 Jeep Cherokee
1.
Remove the climate control panel with a
plastic panel removal tool.
2.
Disconnect the climate controls harness and
set aside.
3.
Remove (2) Phillips screws that hold the
radio trim to the main dash.
