INSTALLATION INSTRUCTIONS
5000-8750 Instructions 02-22-17.docx Page 2 of 9 GS
STEP 1: WIRING CONNECTIONS AND MODULE CONFIGURATION
IMPORTANT NOTE:
The radio will NOT function without either the 5000-8750 module or the 6-to-4 pin jumper installed.
Set DIP switches to match the diagram below. Remove radio and install provided 5000-8750 T-harness. You will need to
remove the 6-to-4 pin jumper from the T-harness and replace it with the provided 5000-8750 module. Connect module
and harness BEFORE connecting radio. Install T-harness behind radio and push all wiring and modules back into dash to
allow room for reinstallation of radio. Route CD Player harness to desired CD player mounting location.
FOR RAM TRUCK INSTALLATIONS, PROCEED TO STEP 2A (page 3).
FOR PACIFICA INSTALLATIONS, PROCEED TO STEP 2B (page 5).
FOR ALL OTHER INSTALLATIONS, PROCEED TO STEP 2C (page 7).
