180
00
3
TOP
UE
After determining the best placement for the trap, locate hardware package in
shipping carton. Using this template, a carpenter’s level or similar levelling
device, locate and mark holes on wall surface where screw anchors will be
used.
For concrete (CMU) walls, use the plastic anchors provided. Use a 3/16”
(4.8mm) masonry drill and drill the holes where marked on wall. Insert
anchors into wall and tap flush.
For sheetrock walls use aluminium anchors provided. Tap into wall and thread
with screwdriver.
For wood or wood panel walls, locate wall studs and use only the screws
provided.
Remove the lamps and the light blades from the unit. With the front cover
hinge on the left, offer the unit to the fixing positions. Insert screws though the
holes in the back of the unit and into the plastic anchors. Do not over tighten
screws. Replace the lamps and light blades.
mm
mm
Hinge
Screw
Plastic anchor
Aluminium anchor
29, NAVIGATION DRIVE.
HURST BUSINESS PARK.
BRIERLEY HILL.
WEST MIDLANDS. DY5 1UT. UK
www.b-one.com
®