Brandani Tower Speaker, Инструкция по эксплуатации

Страница: 19 / 54

Eng
lish
instruction manual
19
sired track on the flash drive.
5. Pressing the Play/Pause button will pause the music, pressing the Play/Pause button again will
resume the music.
Using the AUX Input
There is an Aux In Port located on the top panel of the unit. Analogue sounds signals from other
sources can enter into the speaker through this jack.
1. Connect the 3.5mm auxiliary cable (included) to the Aux-in port. Connect the other end of
3.5mm cable to an MP3 player or any other audio source.
2. Turn the speaker on.
3. Press the mode button repeatedly to switch into the Aux-in mode until the indicator light
below Aux is lit.
4. Use the native controls on the connected device to begin playing audio routed through the unit.
Note: In this mode, Remote Control can only control volume. All the other controls are to be
regulated from the source device.
Do’s and Don’ts
- Unplug the AC-DC adaptor from the power supply when not in use and before cleaning.
- Do not play music at excessive volume levels as damage to hearing may occur.
- Do not use this unit in wet or damp surroundings.