BRAND dispensette S, Руководство по эксплуатации

Страница: 9 / 32

1
2
40
First Steps
Is everything in the package?
Confirm that your package includes:
Bottle-top dispenser Dispensette
®
S
or Dispensette
®
S
Organic, discharge tube or discharge tube with
recirculation valve, telescoping filling tube, recirculation tube (included only in recirculation valve models),
mounting tool, bottle adapters (listed below), a performance certificate and this operating manual.
Wear protective clothing, eye protection and gloves! Follow all safety
instructions and observe limitations of use and operating limitations
(page 34-36).
Warning:
Assembly
Nominal volume, ml Adapters for
bottle thread Filling tube
Length, mm
1, 2, 5, 10 GL 24-25, GL 28/S 28, GL 32-33, GL 38, S 40 125-240
25, 50, 100 GL 32-33, GL 38, S 40 170-330
2.
Mounting the
instrument on a
bottle and align-
ment Screw the instrument (GL 45 threads)
onto the reagent bottle, and then align
the discharge tube with the bottle label.
This is done by rotating the valve block
with the discharge tube (Fig. 2).
To avoid tipping over, use a bottle stand
for small bottles.
1.
Mounting the
filling tube/ recir-
culation tube
Adjust the length of the telescoping filling
tube to the bottle height and attach it.
Center and attach the filling tube care-
fully to avoid damaging the nozzle. If a
discharge tube with a recirculation valve
is used, the optional recirculation tube
must also be installed. Insert it with the
opening pointing outward (Fig. 1).