For most precise results the clock should be set when your local tide
is at its highest point.
Once you’re ready:
1.
Press and hold the demonstration button
2.
Release the button when it reaches ‘High Tide’
3.
Both the clock and the actual tide will now be at their highest
point and will be in sync.
4.
That’s it! From then on the half-hourly movements of your
clock should match that of your local coastline and should
not need further adjustment.
For maximum accuracy the above process can be done at a Full
Moon!
Bringing the Harbour Scene to life with
the Demonstration Function
Your Tide Clock will move on its own every thirty minutes,
however, pressing the demonstration button allows you to show a
full loop of the tide scene and dials, as would be normally be shown
over the course of an entire lunar day.
1.
Locate, press and hold momentarily the demonstration
button on the base of the clock
2.
Take care not to hold the button for too long to avoid
accidentally adjusting the tide setting as described above.
Please note, if the demonstration button ceases to work while the
half hourly movements continue it will be because the batteries have
reached a low level and the clever system is conserving power.
7
