Brainworx bx digital V2, Руководство пользователя

Страница: 12 / 16

10
bx_digital V2 manual
AUTO LISTEN MODE “G”
This AUTO LISTEN MODE finally is pretty easy to explain… as long as you click a
Gain knob (or grab a touch sensitive controller pot or fader) all other bands of that
EQ will be bypassed. This way all you hear is the touched EQ band solo-ed, without
other EQ bands eventually effecting / overlaying your EQ setting.
This may or may not be wanted, so remember: you have the choice to activate or
deactivate each and every AUTO feature (Q, f or G) or any combination of these 3
features using the Auto Listen pop up menu. (see -12- above)
The Auto Listen Mode can be switched off using the blue LED.
7.6. EQ-Section R (Right) or S (Stereo/S-signal)
depending on the selected mode
The same 7-band EQ section as for the L
section (or respectively the M section,
depending on the selected mode), please
check “1”.
7.7. Window switch
You may hide the graphic EQ curves if you want to save some screen space
(we know bx_digital is not a small plug-in…), or if you simply prefer EQ-ing
without seeing the EQ curves. Just click the “arrow” symbol.
7.8. & 7.9. LEDs for the L/R or M/S sections
We have included a digital level control in bx_digital V2 that the hardware does
not have. Red LEDs indicate potentially distorted signals in the respective
signal-path and should be avoided…
7.10. & 7.11. Bass Shift
The Bass Shift is an „intelligent“ EQ band for the bass
frequencies of your mix. We call it Bass Shift because 2
different frequencies will be „shifted“ against each other with
the turn of just one knob. The frequencies have been pre-set
and cannot be changed. If you are looking for a sweepable
Bass- (and Presence-) Shifter please check out
bx_hybrid (available individually).
The Bass Shift EQ can be used to easily adjust the overall bass sound of your
recordings in a professional yet easy & fast way… turning the Bass Shift to the
right will „push“ your bass down one octave by boosting one part of your bass
frequencies while at the same time cutting other (higher) bass frequencies.
Turning the BASS SHIFT to the left will cause the opposite…
t
Please check the EQ panels (17. & 18.) to actually see what you are doing
when working with the Bass Shift!
Turning your BASS SHIFT to the right will result in a more „indirect“ and „deep
soft“ bass sound, while turning to the left will result in a „dryer“ bass sound.