BrainLight Gravity PLUS, Руководство пользователя

Страница: 9 / 28

Setup instructions
Step 7
Push the seat cushion firmly onto the seat and close the zipper on the front.
Step 8
attach the large head cushion, and on top of that the small head cushion, to the velcro at the upper end of the backrest.
adjust the length to your needs.
Step 9
install the remote control holder: loosen the two screws on the outside of the right armrest with a cross-tip screwdriver,
position the holder and mount it with the same two screws.
Step 10
Connect the remote control wire with the main switch box and put the remote control into the holder.
Step 5
Put the armrests to the left and right of the chair and connect their wires
(green) with the same-coloured plugs underneath the seat.
Step 6
Subsequently, screw the armrests to the left and right side of the chair
frame. the screws are already attached to the armrests. We recommend
that you bolt both upper screws lightly first, then screw the lower one
tight, and lastly tighten all of them.
Step 11
9