PCMCIA 1 Port RS422/485
Software Installation
Chapter 3 Page 7
CHAPTER 3
SOFTWARE INSTALLATION
Introduction.
This section describes the software installation procedure allowing
the PCMCIA 1 port RS422/485 to be configured within the
Windows 95 and Windows 98/Millennium operating systems.
Windows 95 Installation
•
Insert the card into an available type2 socket. This can be done
even if the machine is powered ON.
•
If installing from a "power off" condition Windows 95 should
then load normally. During the booting process, Windows 95
will detect the card and briefly display a message box indicating
the detection process.
•
Windows will then display the "Update Device Driver Wizard",
requesting “insert any disk which came with the card”. Insert the
Serial Solutions CDROM installation disk or the Serial
Solutions floppy disk into an appropriate drive and click 'Next' .
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
