Manual for BL-819, BL-830, BL-875
V6.1
© Copyright Brainboxes Ltd
Page 19 of 40
Next you’ll be prompted to set the adapter’s Parity.
Options here are None, Odd or Even.
“Esc” skips this selection leaving the current setting
unchanged.
You are then prompted to change Stop bits. Options
here are 1 or 2.
Pressing “Esc” skips this selection leaving the current
setting unchanged.
You are then asked if you wish to Apply the new
settings immediately. If settings are not immediately
applied, the changes will only take effect after the
Adapter has had its power cycled.
This is to minimise the disruption to the device
configuration by having to reconfigure the terminal
application after changing each setting.
If you have changed any communications parameters,
and wish to continue to access the configuration
menu, you will need to update your terminal
applications settings. The easiest method of
performing this in PuTTY is to close and re-start the
application, setting the new parameters during the
initial application configuration.
1.13.4.
Handshaking
Handshaking is discussed in more detail in the section below, as it is not an option directly available from the menu.
