Brain Bee B-TP 1000, Быстрое руководство

Страница: 6 / 18

B-TP 1000
5 ENGLISH
Cleaning of the equipment
 For LCD display cleaning, use a soft, clean and dry cloth, spraying a small amount of (non
abrasive) glass cleaner. Rub softly.

Do not spray detergent on the display.

Never use acid base or abrasive cleansers to clean the body of plastic components. Use a
soft, clean and dry cloth, spraying a small amount of detergent and rubbing softly.
GENERAL TECHNICAL FEATURES
TPMS sensors activation: 125kHz (LF) radio transmitter
Sensor parameters reading: 433MHz radio receiver
Equipment power supply:
Internal Li-Ion battery pack. Battery recharge with external 12VDC @
2A power supply unit (supplied with the equipment)
Max. battery life (after
complete recharge)
≈8h without activations
or
> 650 reading cycles
or
> 400 programming cycles
Max. recharge time 4h
User interface:
3,5” TFT LCD display 240x320 16bpp brightness 700cd/m2 and
membrane keypad for equipment control.
Internal memory: µSDcard => 4GByte
Communication ports:
1 USB communication port for Firmware update and communication
to PC and/or Touch line diagnostic module.
Operating temperature: 5°-40° C with humidity 0-95% without condensation
Dimensions: 210x98x35mm.
Weight: 500g.
MARKING
B-TP 1000 is manufactured in compliance with the Community Directives being relevant and applicable
to its placing on the market. The characteristic data of the equipment are described on the rear side of
the equipment itself. The equipment meets the requirements of the R&TTE Directive 1999/5/EC
It is prohibited to remove damage or tamper with the equipment “data plate”.
DECLARATION OF CONFORMITY
The declaration of conformity can be downloaded from the website www.brainbee.com/ce , in the B-TP
1000 manuals section.
EQUIPMENT DESCRIPTION
B-TP 1000 is an equipment dedicated to maintenance and diagnosis of both direct and indirect TPMS
systems.
Diagnosis of indirect systems can be done with a scantool of the Touch line connected in bluetooth
mode to the B-TP 1000. Any malfunction is detected using the ABS, ESP rpm sensors: the presence of a
flat tyre can be detected based on the rotation speed of every single tyre.
Diagnosis of direct TPMS systems (pressure and temperature sensors fitted in each tyre) includes the
following functions:

Sensor wake-up via radio (LF 125kHz) with different activation pulse according to the specific
sensor, or by deflating the tyre in the cases indicated by the equipment.