DIGIMIC
MIC
MIC
MIC
CS
CS
CS
CS
Quick Guide
Quick Guide
Quick Guide
Quick Guide
2
BRÄHLER Systems GmbH
Auf der Alten Burg 6
53639 Königswinter
Germany
T +49 (0)2244 930-0
F +49 (0)2244 930-450
www.braehler-systems.com
05.0270 190219 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
Introduction and Connection
Introduction and Connection
Introduction and Connection
Introduction and Connection
The DIGIMIC CS is the compact and inexpensive
solution to listening multi-channel audio signals of a
conference. It has a channel selector and a
headphone jack. Two keys are used to control the
volume and the desired language.
The language channel number and current volume are
shown on an LCD display.
The DIGIMIC CS is connected to the DCen central
unit via a channel selector central unit (CSX4).
The channels can be fed in externally via DANTE® via
the DCen central unit or internally via the DDol32
interpreter console.
The DIGIMIC CS works in a wired system with the
DCen central control unit in stand-alone mode. The
units are connected via RJ45 connectors. Up to 100m
cable length is possible between the individual units.
The DIGIMIC CS units are connected to each other by CAT5e cable or better.
DIGIMIC CS channel selectors are not allowed to be mixed with other devices of the DIGIMIC family in
one chain. (Except additional power supply DExt for extension of DIGIMIC CS chains.)
Connection from the
previous channel selector
or CSX4
(RJ45 plug)
Connection to the
next channel selector
(RJ45 plug)
Example system diagram
