DIGI
MIC
CMic CSV
Quick Guide
3
BRÄHLER Systems GmbH
Auf der Alten Burg 6
53639 Königswinter
Germany
T +49 (0)2244 930-0
F +49 (0)2244 930-450
www.braehler-systems.com
05.0165.M 191028 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
Headphone
You can hear what is being said in two ways - through the built-in speakers or through headphones. Connect
the headphones and adjust the volume. To adjust the volume, press the function keys or the rocker buttons
on the side of the CMic CSV. The selected volume can be read on the display.
Microphone
The microphone is plugged in according to the sketch. Pay attention to the notch on the microphone plug
and the Minicon socket. Screw the microphone tight to lock it in place.
Press the microphone button to turn on the microphone. Press the Microphone button again to turn the
microphone off.
The CMic CSV units operate in different mode settings. These are determined by the operator of the
conference. After pressing the microphone key you have the following options.
The key and ring light up red: The microphone is open. You can speak to the remaining delegates.
The button and ring are off: The maximum number of speakers has been reached - you must try to switch
on your microphone again at a later time.
Button flashes red: The maximum number of speakers has been reached. You must wait (word request).
Your microphone is automatically activated as soon as it is your turn to speak.
notch
headphone jack
(3.5mm jack)
volume control
(function key)
Microphone button
volume control
(Rocker key)
