UNI EN ISO 9001-2015 n° 9115.BRMO
UPS OCTANS 10/20kVA 3:1
USER MANUAL
File name
Date
Page
Code
PUV9E010/15/20-AK
DF19010A
10/04/2019
15 di 28
MD03006C
All rights are reserved according to the law. Reproducing or distributing this document to third parties without permission is prohibited.
6.2.2 Faceplate display
Faceplate display illumination
ON
O
FF
ESC
ENT
BYPASS
RECT
INV
O UTPUT
F AULT
Fig.6.2.2° Overview of the operating panel of the UPS
1. LCD Display Board
2. ESC
3. Off button
4. On button
5. right or down
6. Enter
7. Left or up
8. Output indicator
9. Inverter Indicator
10. Battery Indicator
11. Mains (AC) Indicator
12. Bypass Indicator
13. Fault Indicator
LCD display
1
、
LED indicator definition
1) Fault Indicator
（
red
）：
“On ”indicates when a fault occurred; “Off” means no fault occurred.
2) Indicator
（
Green
）：
“On” means AC is normal, “Off” means AC is not present, and blinking means
voltage is beyond normal range
3) Inverter Indicator
（
Green
）：
“On” means when load is powered by inverter, “Off” means when it is
not working and blinking means it is in overload condition.
4) Bypass Indicator
（
Green
）：
“On” means when UPS is in bypass mode, “Off” means not in bypass
mode and blinking means when the input is beyond normal range
5) Battery Indicator
（
Green
）：
On: when UPS is in battery mode, Off: Not in Battery mode; Blinking:
when battery voltage is low or battery is not connected
6) Output Indicator
（
Green
）：
On: when there is output, Off: no output.
