Braeburn Builder 1000NC Скачать руководство пользователя страница 1

This thermostat requires 24 Volt AC Power or two (2) properly installed 
“AA” Alkaline batteries for proper operation. When connecting 24 Volt 
AC Power the batteries may be installed as a backup. 

For use only as described in this manual. Any other use 

will void warranty.

1000NC

Single Stage Heat / Cool
Conventional and Heat Pump

1

  

Specifications

About Your Thermostat

Installation

System Testing

Setting User Options 

6

  Operating Your Thermostat

7  

Additional Operation Features

8

  Thermostat Maintenance

®

Warning

Turn off power to the heating or cooling 

equipment before installation.

Attention

For installation by experienced service 

technicians only. Follow applicable codes.

1200NC

Up to 2 Heat / 1 Cool
Conventional and Heat Pump

Read all instructions before proceeding.

   This thermostat is compatible with:

   

•  Single stage heat / cool conventional and heat pump systems

   

•  Conventional systems up to 2 heat / 1 cool (1200NC only)

   

•  Single compressor heat pump systems with an auxiliary heat stage (1200NC only)

   

•  250 – 750 millivolt heat only systems

  

Electrical and control specifications:

 

 

•  Electrical Rating:  24 Volt AC

   

•  1 amp maximum load per terminal

   

•  AC Power:  18 – 30 Volts AC

   

•  DC Power:  3.0 Volt DC (2 “AA” Alkaline Batteries Included)

   

•  Control Range:  45° – 90° F (7° – 32° C)

   

•  Temperature Accuracy:  +/- 1° F (+/- .5° C)

   Terminations

   

•  1000NC – Rc, Rh, O, B, Y, W, G, C

   

•  1200NC – R, O, B, Y1, E/W1, G, W2, C

1

Specifications

1000NCW-100-12

Non-Programmable 

Thermostats

Model number is located on back of thermostat

Detailed

User Guide

Содержание Builder 1000NC












Отзывы: