manualshive.com logo in svg

Brady THT-BP Precision, Руководство оператора, Страница: 120 / 132

Поделиться
Скачать
Brady THT-BP Precision Скачать руководство пользователя страница 120

E-2

Transfer Printer THT-BP Precision

5

6

1

7

Fig. E-2  Changing Printhead (I)

1. Remove the media from the printer.

2. Swing the lever (

6

) to the position shown in figure E-2. In this position, the

printhead assembly is unlocked but still lying on the print roller.

3. Loosen the printhead locking screw (

5

) using the Allen key (

7

).

4. To lift the printhead assembly, swing the lever (

6

) clockwise until it stops.

5. Remove the printhead (

1

) from the pins (

11

) on the printhead carriage.

WARNING !
Unplug the power cord from the power source before starting!

CAUTION !
Protect the printhead against damage by electrostatic dischargement !
- Put the printer on to a grounded conductive surface !
- Ground yourself during printhead replacement for example using a

grounded wrist-strap !

- Do not touch the connector pins of the printhead by naked hands !
Make sure the glass surface on the printhead is not touched by sharp
objects or your hand!

Appendix E - Replacing Assembly Units

Содержание THT-BP Precision





































































































































Отзывы:

Нет отзывов