Brady IP Printer series, Быстрый старт, Страница: 9 / 23

Quick Start Manual
6
NOTE: The Brady IP printer senses the voltage type and automatically
adjusts for the power source.
3. Connect the printer to the computer using the supplied USB cable, an
RS-232 cable or an Ethernet cable (refer to
Interface Connections on
page 6 ).
4. If you do not have BradySoft, LabelMark or IdentiLab software installed on
your computer, refer to
Software Installation on page 11 .
5. Turn on the power switch on the back of the printer (Figure 1, 5) . The
printer will perform a self test and then go into Ready mode.
NOTE: If an error occurs during installation, refer to the “Brady IP™
Printer Operator/Configuration Manual” located on the Product
CD.
Interface Connections
The printer has a RS-232 port (Figure 1, 1) , a USB port (Figure 1, 2) and an
Ethernet port (Figure 1, 3) .
Figure 1, Interfaces and Connectors
1. RS-232 port 4. Power connection socket
2. USB port 5. Power switch
3. Ethernet port
1
2
3
4
5