Brady IDXpert Handheld Labeler, Быстрый старт

Страница: 8 / 13

Quick Start Guide 7
Font and bold settings are set on a line-by-line basis. To change the font
size or boldface text:
•
Press
FONT SIZE
•
Use the up/down arrow softkeys—or the arrows on your keypad
—[ ▲ ]
[ ▼ ]—
to select a font size.
•
Press the [BOLD] softkey to toggle bold ON or OFF.
Formatting with Menu Choices
The smart-cell recognizes the cartridge material installed in the printer
and automatically sets many label formatting options. The following
menu choices allow you to add or change the formatting:
Note: See the Menu Tree on page 9 of this guide for a listing
of submenus related to each selection.
To perform a type of formatting, press MENU and the
corresponding softkey:
Softkey
Label Format —Select general or wiremarker labels. Wiremarker
mode repeats text line(s) as many times as will fit on a label.
FRMT
Continuous —Set either auto or fixed length, for terminal block
and banner labels.
CONT
Justify —Set horizontal and vertical justification of label data. JUST
Rotate —Set rotation of label data to 0, 90, 180, or 270 degrees. ROT
Units —Change units—to inches, mms, or points—for displaying
label and font sizes.
UNIT
Barcode —Add Code 39 barcodes with human readable text. BAR
Set Time —Set the time to print a real-time stamp on your label. TIME
Set Date —Set the date to print a real-time date stamp on your
label.
DATE
Language —Change the default language LANG
FONT: 10 pt
Bold: OFF
The display screen shows the
current font size and bold status.