Page 5
Bold printing is supported in both large and small font modes. To toggle the bold setting on or off:
1. Press the Shift-O key combination.
2. Press the Up arrow key to toggle bold printing on or off.
3. Press the Enter key to exit.
Batch serialization
To print a batch of serialized labels:
1. Position the cursor over the right-most character of the desired field, i.e. the number 8 in 99998.
2. Press the Shift-Serial key combination.
3. Enter a number from 1 to 99.
4. Press the Print key to start printing or press the Clear key to cancel.
Multiple serialized labels/markers
To print multiple copies of serialized labels or markers:
1. Press the Shift-Serial key combination.
2. Enter a number from 1 to 99.
3. Press the Shift-Print key combination.
4. Enter a number 1 to 99.
5. Press Enter or Print to print or press Clear to cancel.
Strip mode serialization
Batch mode serialization in strip mode differs slightly from that of component and wiremarker mode. Because two
strip markers are printed at a time (side by side), the serial number is incremented by one for
each
of the strip
markers. This allows the user to alter the way strip markers are serialized. For example:
To print 4 strip labels numbered from 0000 to 0003, you would do the following: Refer to Figure 1A.
1. Enter “0000" in the left hand marker display field.
2. Enter “0001" in the right hand marker display field.
3. Press the Shift-Serial key combination.
4. Enter the number “4".
5. The result will be four labels numbered: 0000, 0001, 0002, 0003.
